Installation – Spinalogic Drawing

Installation of Spinalogic Drawing can be done on a single machine. You can add additional workstations after the initial install to connect to the first PC so you can view your x-rays from anywhere in the office.

Installation will differ depending on whether you have your own digital x-ray or not.

Your own Digital X-Ray

  1. Install the server/workstation first. The system you install on will need to meet the server hardware requirements. We will call the machine the server but you can also view x-rays on it if you want.
  2. Set the server to have a static IP address.
  3. Enter the server static IP into your digital x-ray system so it will send x-rays to that machine. Use port 104 and any AET you like. You may need help from your x-ray system supplier to do this but it’s a 5 minute task for someone who knows what they are doing.
  4. Download and install Spinalogic on the server (you get the link for this when you buy)
  5. If you want to install further Workstations on other PCs in your office, it’s easy – directions are here (you’ll need to have installed Spinalogic on your server to access this link)

Third-Party X-Rays Taken Off-Site

If you have your x-rays taken off-site, the x-ray service will supply you with digital x-rays on a CD-ROM. You can read the x-rays off this CD directly into Spinalogic, and return the disk directly to the patient. In this scenario, you’ll probably want a workstation set up at your front desk so your CA can do this.

  1. Install the server/workstation first. The system you install on will need to meet the server hardware requirements. We will call the machine the server but you can also view x-rays on it if you want.
  2. Download and install Spinalogic Server and Workstation on the server
  3. If you want to install further Workstations on other PCs in your office (say at front desk to accept x-rays on CD-ROM), it’s easy. Directions are here (you’ll need to have installed Spinalogic on your server to access this link)
This entry was posted in Product Info. Bookmark the permalink.

One Response to Installation – Spinalogic Drawing

  1. Pingback: Installation | Spinalogic 2.0

Leave a Reply

Your email address will not be published. Required fields are marked *